Saturday, March 24, 2012

DESIGN PROCEDURE OF BITUMINOUS MIXES


In the design procedure of a bituminous mix, following steps are involved.

i) Selection of aggregate to be employed in the mix.

ii) Selection of aggregate grading.

iii) Determination of the proportion of each aggregate required to develop the design grading.

iv) Determination of the specific-gravity of the aggregate blend.

v) Determination S.G. of the bitumen.

vi) Make up trial specimens with varying bitumen contents.

vii) Determination of the specific-gravity (S.G) of each compacted specimen.

viii) Make stability test on the specimen.

ix) Determine the percentage of voids in each paving specimen and if the design method in use requires it, calculate the VMA and percent voids filled with bitumen.

x) Selection of the optimum bitumen content from the obtained data.

No comments:

Post a Comment